Braga, Franco, editor | Salvatore, Walter, editor | Vignoli, Andrea, editor Atti del XVII Convegno ANIDIS L'ingegneria Sismica in Italia : Pistoia, 17-21 settembre 2017 2017 - Pisa University Press
Braga, Franco, editor | Salvatore, Walter, editor | Vignoli, Andrea, editor Atti del XVII Convegno ANIDIS L'ingegneria Sismica in Italia : Pistoia, 17-21 settembre 2017 2017 - Pisa University Press 3310 p. Online only available Downloadable in parts Scaricabile in parti Workspace Quote Available in parts Information ISBN: 9788867418541 Permalink: http://digital.casalini.it/9788867418541 SERIES Studi in tema di internet ecosystem SUBJECTS Civil engineering Engineering, Civil Engineering In this volume Capacity design in geotechnical engineering Performance-Based Seismic Design In Real Life : The Good, The Bad And The Ugly Seismic Performance of Structural Members Incorporating Recycled Rubber Materials Effects of site-induced non-synchronism and soil non linearity in the seismic response of bridges founded on piles The role of seismic input properties on the performance of bridge piers on cylindrical caisson foundations Geotechnical design of retaining micropile walls for an underground parking on a sloping area On the influence of pile discretization in single pile kinematic analysis using a boundary element method (BEM) based approach Analysis of r.c. single pile lateral response considering the influence of tension stiffening Local Seismic Response of Castelnuovo hill (AQ-Italy) with 2D models Validation of a 3D model for dynamic soil-structure-interaction of pile foundations by means of in situ tests An Analytical Formulation for the Kinematic Interaction Analysis of Inclined Single Piles An experimental and numerical model for wave propagation studies in sandy soil 3 level seismic microzoning studies to urban planning and construction design Soil Damping Ratio Estimation by Logarithmic Decrement Method in Resonant Column Tests Soil-Structure Interaction Effects on the Seismic Behavior of Reinforced Concrete Moment Resisting Frames Urban-scale soil-structure interaction effects for risk assessment : the case of Thessaloniki city, Greece The method I.OPà.CLE for the formulation and calculation of structural operational efficiency indices for the assessment of emergency limit conditions Structural operational efficiency indices for the assessment of Emergency Limit Condition (I.OPà.CLE) : experimental results Expeditious assessment of seismic vulnerability of existing buildings from a statistic sample of school buildings, property of the Comune di Firenze Evaluation of the seismic hazard of common typologies of buildings in the municipality of Patti (Messina) Building Features of Accumoli and Amatrice in a Pre-Earthquake Survey Seismic vulnerability assessment of the village of Alzano, in the Salto Valley, as a first and unavoidable step for its revitalization by using local natural resources and advanced technologies On the effects of seismic sequences on masonry structures Analysis of the damage of ordinary buildings in the historic centre of Norcia struck by the 2016 Italian earthquake Historical quakeproof building systems in Italy: constructional skill and normative experimentatio : notes for a critical comparison Performance Decay of Masonry Walls Subjected to In-plane Loads Evaluation of In-Plane Rocking-Sliding Failure Modes of Multi-Storey Masonry Walls for Quick Analysis at Urban Scale Simulating shear-compression mechanical behavior of historical masonry panels: sensitivity of 3D numerical models to input parameters Limit analysis of polygonal-shaped masonry elements: the case study of bay windows in Boston's Back Bay. Seismic vulnerability of unreinforced masonry walls: Linear and nonlinear, static and dynamic procedures compared Unreinforced Masonry Churches in New Zealand : towards an holistic framework for the identification of optimal seismic retrofit intervention Modelling, analysis and safety verifications of existing masonry buildings : seismic assessment and design of strengthening interventions Nonlinear static procedure for the seismic assessment of unreinforced masonry buildings : definition of the limit states criteria Nonlinear static procedure for the seismic assessment of unreinforced masonry buildings : definition of the limit states criteria Interpretative guidance on the design of timber buildings according to the Italian Building Code Simplified Approaches for the Seismic Risk Rating of Reinforced Concrete Buildings and the Selection of Retrofit Strategies Seismic damage assessment of r.c. strategic buildings: a case study Affidabilistic assessment of the seismic vulnerability of an existing RC building The effect of stiffness variation in elevation on maximum IDR for existing RC buildings Seismic vulnerability analysis for reinforced concrete structures through simplified and detailed approaches Seismic performance of masonry infilled RC frames designed for gravity loads Rigid floor assumption in nonlinear static analysis of reinforced concrete existing buildings Mechanical characterization of a polyurethane-cement hybrid foam to be used for seismic protection of nonstructural components Seismic Vulnerability Assessment of Three Nave Churches in Alife-Caiazzo Diocese Assessment of Seismic Vulnerability at Territorial Scale: The Case Study of Caltabellotta (AG) Advancements in Seismic Vulnerability Assessment Methodologies for RC Buildings at Territorial Scale Correlation between ground motion parameters and structural response of code conforming and existing RC buildings Emilian fortified buildings : the relationships between the morphological and structural characteristics and the mechanisms of damage Estimation of the seismic structural capacity of masonry buildings through simplified procedures Da.D.O – A web-based tool for analyzing and comparing post-earthquake damage databaserelevant to national seismic events since 1976 Implications of Different Damage Definitions on the Empirical Seismic Vulnerability of Masonry Buildings Seismic Vulnerability Assessment of complex buildings/aggregated buildings in historical centers : first level methods A class-oriented large scale comparison with postearthquake damage for Abruzzi region Fast procedure for seismic risk assessment of r.c. buildings Sensitivity analysis of seismic behaviour of masonry aggregates Seismic vulnerability of RC frame building classes: sensitivity of the probability of exceeding the Life Safety limit state to structural detailing and mechanical properties of the materials Seismic risk of the non-structural architectural elements of a new hospital : application of a seismic performance analysis and verification methodology Influence of stiffness loss of masonry infilled r.c. frames in the calculation of the structural operational index (IOPS) Fragility assessment of non-structural components undergoing earthquake induced rocking motion Cyclic behaviour evaluation of T-Joints for the seismic assessment of piping systems The museum complex in a high seismic area : structural analysis and vulnerability assessment of artistic assets : the case study of S. Maria delle Monache (Isernia) Seismic demand and capacity assessment of suspended ceiling systems Reliability of the SMAV procedure applied to unreinforced masonry buildings: the case study of Sanremo city hall A numerical study on the seismic behavior of unreinforced masonry buildings with flexible diaphragms Assessment of the loading capacity of masonry buildings under horizontal loads : the case study of the Mercato delle Vettovaglie in Livorno Influence of the modelling approach in the dynamic analysis of masonry towers Effects of damage on the dynamic modal properties of masonry towers Numerical and experimental analysis of a masonry chimney A critical investigation on typological and structural characteristics of residential buildings in Umbria for their quick seismic risk classification The MaChro Form : a new automatic tool for the survey and seismic vulnerability assessment of churches Rapid Seismic Vulnerability Assessment of Churches of Citeriore Abruzzi by means of MaChro Form Why a probability of exceedance of 10% in 50 years? : a New approach to seismic design Comparative analysis of benchmark case studies for assessing the reliability of software packages targeted to the seismic assessment of URM buildings Comparison between seismic performance of different design philosophies by means of loss assessment analysis Seismic Design of Non-Structural Elements using Building Information Modelling Building Information Modeling as support for seismic design Damping reduction factor in seismic engineering using a stochastic approach An equivalent shear-shear torsional beam model for seismic analysis of multistore tower buildings Strongback system to enhance the building seismic response of framed structures A new discrete macro-node (DMN) for the nonlinear modelling of the reinforced concrete beam/column joints Simulation of concrete crack development in seismic assessment of existing gravity dams Experimental and numerical study of the cyclic behavior of exterior RC beamcolumn joints made with recycled concrete R/C flat slab-column connections under lateral loading The influence of floor joists on the lateral stiffness of R.C. buildings Modelling Uncertainties in NLFEM Simulation of Cyclically Loaded R.C. hear Walls Critical analysis of the empirical relations for the evaluation of the ultimate plastic rotation of R.C. columns under cyclic loadings Boundary elements of thin reinforced concrete wall vulnerable to out-of-plane instability: experimental results and numerical modelling Dual-phase steel reinforcing bars for RC buildings in seismic prone areas : selection and production Reinforced Concrete structures with Dual-Phase steel reinforcing bars Buckling implementation in PARC_CL2.1 for the response prediction of steel bars subjected to cyclic loading Analytical and Numerical Methods for the Evaluation of Critical Conditions in Longitudinal Bars of RC Columns Cyclic bar model with bond-slip for non linear analysis of existing RC structure Pitting corrosion effects on the seismic behaviour of existing R.C. buildings Design and realization of a reinforced concrete building at Accra (Ghana), called One Airport Square, with complex geometric façades and spatial truss system, placed on seismic isolator devices Influence of normal stress on the seismic response of masonry structures Fiber-based modeling of masonry cross sections subjected to axial loading and biaxial bending Implementing and Applying a Continuum Bed Joint Shearing Model for Masonry Structures Reliability of Equivalent-Frame Models for Masonry Walls with Irregular Openings The effectiveness of strut model of the spandrel panels in masonry buildings under seismic forces Modelling of masonry walls with geometric irregularities: open problems Model uncertainties in seismic analysis of existing masonry buildings : the Equivalent-Frame Model within the Structural Element Models approach Rocking response of masonry columns : experimental study and numerical simulation Dynamic collapse testing of a full-scale URM cavity-wall structure Shaking table tests of URM walls subjected to two-way bending out-of-plane seismic excitation Material characterization for the shaking-table test of the scaled prototype of a stone masonry building aggregate Shaking-table test of a half-scaled natural stone masonry building aggregate with flexible diaphragms A Cyclic Macroelement for Dynamic Analysis of Unreinforced Masonry Structures Seismic performance of structural systems equipped with buckling-restrained braces Nonlinear dynamic analysis of Italian code-conforming one-storey steel buildings for seismic risk assessment Cyclic inelastic tests on built-up steel columns including base-plate connections Numerical modelling of the monotonic behaviour of hybrid steel-concrete shear walls Precast slab and double-slab R.C. wall in steel structures A semi-analytical model for the cyclic behavior of shear link in eccentrically braced frames structures Effectiveness of the capacity design regulations for eccentrically braced frames structures Seismic Design of Automated Rack Supported Warehouses Down-Aisle Seismic Behavior of Pallet-Rack Systems : Experimental Tests and Numerical Analyses Effects of pinching in the hysteresis loop of rack connections Performance based assessment of an industrial steel structure with scaled and unscaled ground motions The New Guidelines of Italian High Council of Public Works for industrial steel racks in seismic areas : the state of work High bay warehouses in seismic areas : general design problems and applications Mechanical behaviour of inclined screws in timber-concrete composite system Numerical analysis of timber log-haus walls with steel dovetail reinforcements under in-plane seismic loads Assessment of the seismic safety of post-and-beam timber buildings braced with nailed shear walls: pushover anaysis based on equivalent diagonal springs The role of the diaphragm stiffness on the distribution of the seismic action among the shear walls in crosslam massive wooden buildings On seismic design of structures with CLT walls Design of a mass-timber building with different seismic bracing technologies TRE3 project : a hybrid timber-frame wall system for emergency housing facilities Estimation of seismic fragility curves for precast RC industrial buildings from damage observational data from the 2012 Emilia earthquake Design and experimental verification of wet-joints between precast beams and columns for the construction of seismically resistant pipe rack structures Seismic retrofit strategies for friction beam-to-column connections of industrial RC precast structures Analysis of a tile-beam connection for precasted industrial buildings and its influence on the global seismic response of the structure Development of equivalent structural models for the coupled analysis of the dynamic soil-structure interaction Nonlinear Response of Bridge Piers Founded on Inclined Pile Groups Simplified polynomial formulation for the calculation of the Moment-Curvature diagram of RC rectangular sections Effects of spread and local geometrical irregularities on the horizontal carrying capacity of masonry arches Influence of soil thrust on seismic capacity of masonry arch bridges Seismic behaviour of stone arch bridges in Sicily Influence of the arch thickness discontinuities on the seismic capacity of masonry bridges Protection of Critical Infrastructure in the event of Earthquakes : CIPCast-ES Response prediction of multistory RC walls using static and dynamic nonlinear analysis and PARC_CL2.0 crack model PRIAMUS : A new tool for the probabilistic risk assessment with Monte Carlo simulations of Process Plants under Seismic Loading Assessment and retrofitting of a metal silo for granular solids to be installed in seismic zone Static and dynamic studies of a three span arch ancient masonry bridge of railway line Canicattì-Gela-Comiso A Profitability analysis for assessing the optimal seismic retrofit strategy for production processes susceptible to business interruption Model identification of damping in railway beam bridges Ambient vibration testing of an historic masonry structure Equivalent modal parameters in monitored buildings during the recent Italian seismic events Experimental setup for the execution of quasi-static cyclic tests on ceilings Study of the Dynamic Behavior of Isolated Seismic Mass for the Creation of a 6 Degree of Freestanding Table Identification of Infill Panels' stiffness in Frame Structures through Inverse Analysis Experimental comparison of in-plane mechanical response of glazed curtain walls Assessment of concrete strength in existing structures according to the EC8-3 procedure Abacus of the masonry types of the Toscana Region Critical Analysis About National And International Experimental Campaigns On Spandrels Executed During Last Years Laboratory Calibration and In Situ Application of Test Methods to Assess Masonry Shear Characteristics thought Flat Jack (FJ-SCT Method) Experimental assessment of the seismic performance of full-scale curtain wall systems Numerical Interpretation of Experimental Tests on Masonry Spandrels Smart technologies for integrated seismic risk management in industrial plants The role of dynamic monitoring for seismic assessment of monumental heritage buildings : an application to Palazzo dei Consoli in Gubbio The role of environmental effects in the structural health monitoring : the case study of the Ficarolo Tower in Rovigo, Italy Traffic effects on historical artefacts Far-field earthquake-induced damage detection in a monumental bell-tower after Central Italy seismic sequence (2016) through vibration-based SHM. Numerical and experimental analyses to evaluate the effect of soil and nonstructural elements on the modal parameters of reinforced concrete structures Seismic Improvement Of Monumental Historic Buildings Using Horizontal Steel Bracing Systems : Case Studies, Comparative Evaluations With Alternative Systems Forming New Steel-Framed Openings in Load-Bearing Masonry Walls : Design Methods and Nonlinear Finite Element Simulations Cyclic response in shear and design criterion of brick-cement mortar masonry shear-walls retrofitted with steel grids Working on existing buildings : seismic retrofit with application of CAM® System Influence of beam-column joints behaviour on seismic response of R.C. existing buildings Experimental behavior of damaged RC beam-column joints retrofitted with FRP composites Cyclic Response of R/C Beam-Column Joints Strengthened with Steel FRP/FRCM Composite Materials Axial compressive behavior of FRP/Steel-confined concrete with preload Evaluation of the mechanical properties of the concrete columns confined with FRP and FRCM systems in compression Shear strength model with variable inclination of concrete stress field for r.c. beams strengthened by composite textile Bond behaviour of steel FRP/FRCM systems on concrete substrates : an experimental investigation Experimental Characterization of FRCM Systems for Conservative and Strengthening Intervention on Monumental Real Estate Heritage Experimental and numerical study on the behaviour of masonry vaults subjected to horizontal loads : evaluation of the effectiveness of fiber reinforced mortar Full Scale Tests on Hollow Brick Masonry Walls Repaired with Steel Fiber Reinforced Mortar Coating Numerical Study of a Full Scale Hollow Brick Masonry Building Strengthened with Steel Fiber Reinforced Mortar Coating Seismic Strengthening with Damping Devices and Performance Evaluation Non-linear time history analyses of unreinforced masonry building with in-plane stiffened timber floors Strategies and modeling methods for the reduction of the seismic vulnerability of historical industrial buildings with wide timber roofs In-plane strengthening of traditional timber floors by means of CLT panels : experimental tests and numerical analysis Seismic protection of existing r.c. buildings with post-tensioned timber walls CLT used as seismic strengthener for existing masonry walls Interventions aimed at reducing the excessive deformability of timber floors : strengthening and stiffening techniques according to the new Italian code (NTC) Restoration and seismic improvement of some construction aggregates in the historic center of L'Aquila Restoration, strengthening and seismic improvement design of the Duomo of Pienza Effectiveness of the techniques used to strengthen the masonry buildings in the historic centre of Norcia (Italy) Status of the ongoing reconstruction process in L'Aquila eight years after the quake : a general overview Historical artistic renovation and seismic improvement : securing and implementation of a new system supporting the pulpit of Donatello's bronze Passion of the Basilica of San Lorenzo in Florence Seismic and vibration protection of the statue Pietà Rondanini by Michelangelo Seismic Performance of Structures Isolated with FPS for Different Soil Conditions considering Intermediate Isolation Degrees Seismic Reliability of Yielding Base-Isolated Structures Assessment of the seismic response of Multi-Stage Concave Surface Slider devices The local ground-motion amplification and the behaviour of the seismic isolated buildings at L'Aquila downtown Improved response-spectrum analysis of base isolated buildings : Elastic versus inelastic response spectra Anti-Seismic Devices : Dynamic Testing Protocols and Testing Facilities Development A simplified method to predict torsional effects on seismic isolated buildings Experimental and Numerical Study of Two-Story Post-Tensioned Seismic Resisting CLT Wall with External Hysteretic Energy Dissipaters Metallic yielding devices for seismic vibration control : the role of the analytical models