Sensitivity analysis of seismic behaviour of masonry aggregates
P. 403-414
-
Informationen
-
In derselben Datei
-
Capacity design in geotechnical engineering
-
Performance-Based Seismic Design In Real Life : The Good, The Bad And The Ugly
-
Seismic Performance of Structural Members Incorporating Recycled Rubber Materials
-
Effects of site-induced non-synchronism and soil non linearity in the seismic response of bridges founded on piles
-
The role of seismic input properties on the performance of bridge piers on cylindrical caisson foundations
-
Geotechnical design of retaining micropile walls for an underground parking on a sloping area
-
On the influence of pile discretization in single pile kinematic analysis using a boundary element method (BEM) based approach
-
Analysis of r.c. single pile lateral response considering the influence of tension stiffening
-
Local Seismic Response of Castelnuovo hill (AQ-Italy) with 2D models
-
Validation of a 3D model for dynamic soil-structure-interaction of pile foundations by means of in situ tests
-
An Analytical Formulation for the Kinematic Interaction Analysis of Inclined Single Piles
-
An experimental and numerical model for wave propagation studies in sandy soil
-
3 level seismic microzoning studies to urban planning and construction design
-
Soil Damping Ratio Estimation by Logarithmic Decrement Method in Resonant Column Tests
-
Soil-Structure Interaction Effects on the Seismic Behavior of Reinforced Concrete Moment Resisting Frames
-
Urban-scale soil-structure interaction effects for risk assessment : the case of Thessaloniki city, Greece
-
The method I.OPà.CLE for the formulation and calculation of structural operational efficiency indices for the assessment of emergency limit conditions
-
Structural operational efficiency indices for the assessment of Emergency Limit Condition (I.OPà.CLE) : experimental results
-
Expeditious assessment of seismic vulnerability of existing buildings from a statistic sample of school buildings, property of the Comune di Firenze
-
Evaluation of the seismic hazard of common typologies of buildings in the municipality of Patti (Messina)
-
Building Features of Accumoli and Amatrice in a Pre-Earthquake Survey
-
Seismic vulnerability assessment of the village of Alzano, in the Salto Valley, as a first and unavoidable step for its revitalization by using local natural resources and advanced technologies
-
On the effects of seismic sequences on masonry structures
-
Analysis of the damage of ordinary buildings in the historic centre of Norcia struck by the 2016 Italian earthquake
-
Historical quakeproof building systems in Italy: constructional skill and normative experimentatio : notes for a critical comparison
-
Performance Decay of Masonry Walls Subjected to In-plane Loads
-
Evaluation of In-Plane Rocking-Sliding Failure Modes of Multi-Storey Masonry Walls for Quick Analysis at Urban Scale
-
Simulating shear-compression mechanical behavior of historical masonry panels: sensitivity of 3D numerical models to input parameters
-
Limit analysis of polygonal-shaped masonry elements: the case study of bay windows in Boston's Back Bay.
-
Seismic vulnerability of unreinforced masonry walls: Linear and nonlinear, static and dynamic procedures compared
-
Unreinforced Masonry Churches in New Zealand : towards an holistic framework for the identification of optimal seismic retrofit intervention
-
Modelling, analysis and safety verifications of existing masonry buildings : seismic assessment and design of strengthening interventions
-
Nonlinear static procedure for the seismic assessment of unreinforced masonry buildings : definition of the limit states criteria
-
Nonlinear static procedure for the seismic assessment of unreinforced masonry buildings : definition of the limit states criteria
-
Interpretative guidance on the design of timber buildings according to the Italian Building Code
-
Simplified Approaches for the Seismic Risk Rating of Reinforced Concrete Buildings and the Selection of Retrofit Strategies
-
Seismic damage assessment of r.c. strategic buildings: a case study
-
Affidabilistic assessment of the seismic vulnerability of an existing RC building
-
The effect of stiffness variation in elevation on maximum IDR for existing RC buildings
-
Seismic vulnerability analysis for reinforced concrete structures through simplified and detailed approaches
-
Seismic performance of masonry infilled RC frames designed for gravity loads
-
Rigid floor assumption in nonlinear static analysis of reinforced concrete existing buildings
-
Mechanical characterization of a polyurethane-cement hybrid foam to be used for seismic protection of nonstructural components
-
Seismic Vulnerability Assessment of Three Nave Churches in Alife-Caiazzo Diocese
-
Assessment of Seismic Vulnerability at Territorial Scale: The Case Study of Caltabellotta (AG)
-
Advancements in Seismic Vulnerability Assessment Methodologies for RC Buildings at Territorial Scale
-
Correlation between ground motion parameters and structural response of code conforming and existing RC buildings
-
Emilian fortified buildings : the relationships between the morphological and structural characteristics and the mechanisms of damage
-
Estimation of the seismic structural capacity of masonry buildings through simplified procedures
-
Da.D.O – A web-based tool for analyzing and comparing post-earthquake damage databaserelevant to national seismic events since 1976
-
Implications of Different Damage Definitions on the Empirical Seismic Vulnerability of Masonry Buildings
-
Seismic Vulnerability Assessment of complex buildings/aggregated buildings in historical centers : first level methods
-
A class-oriented large scale comparison with postearthquake damage for Abruzzi region
-
Fast procedure for seismic risk assessment of r.c. buildings
-
Sensitivity analysis of seismic behaviour of masonry aggregates
-
Seismic vulnerability of RC frame building classes: sensitivity of the probability of exceeding the Life Safety limit state to structural detailing and mechanical properties of the materials
-
Seismic risk of the non-structural architectural elements of a new hospital : application of a seismic performance analysis and verification methodology
-
Influence of stiffness loss of masonry infilled r.c. frames in the calculation of the structural operational index (IOPS)
-
Fragility assessment of non-structural components undergoing earthquake induced rocking motion
-
Cyclic behaviour evaluation of T-Joints for the seismic assessment of piping systems
-
The museum complex in a high seismic area : structural analysis and vulnerability assessment of artistic assets : the case study of S. Maria delle Monache (Isernia)
-
Seismic demand and capacity assessment of suspended ceiling systems
-
Reliability of the SMAV procedure applied to unreinforced masonry buildings: the case study of Sanremo city hall
-
A numerical study on the seismic behavior of unreinforced masonry buildings with flexible diaphragms
-
Assessment of the loading capacity of masonry buildings under horizontal loads : the case study of the Mercato delle Vettovaglie in Livorno
-
Influence of the modelling approach in the dynamic analysis of masonry towers
-
Effects of damage on the dynamic modal properties of masonry towers
-
Numerical and experimental analysis of a masonry chimney
-
A critical investigation on typological and structural characteristics of residential buildings in Umbria for their quick seismic risk classification
-
The MaChro Form : a new automatic tool for the survey and seismic vulnerability assessment of churches
-
Rapid Seismic Vulnerability Assessment of Churches of Citeriore Abruzzi by means of MaChro Form
-
Why a probability of exceedance of 10% in 50 years? : a New approach to seismic design
-
Comparative analysis of benchmark case studies for assessing the reliability of software packages targeted to the seismic assessment of URM buildings
-
Comparison between seismic performance of different design philosophies by means of loss assessment analysis
-
Seismic Design of Non-Structural Elements using Building Information Modelling
-
Building Information Modeling as support for seismic design
-
Damping reduction factor in seismic engineering using a stochastic approach
-
An equivalent shear-shear torsional beam model for seismic analysis of multistore tower buildings
-
Strongback system to enhance the building seismic response of framed structures
-
A new discrete macro-node (DMN) for the nonlinear modelling of the reinforced concrete beam/column joints
-
Simulation of concrete crack development in seismic assessment of existing gravity dams
-
Experimental and numerical study of the cyclic behavior of exterior RC beamcolumn joints made with recycled concrete
-
R/C flat slab-column connections under lateral loading
-
The influence of floor joists on the lateral stiffness of R.C. buildings
-
Modelling Uncertainties in NLFEM Simulation of Cyclically Loaded R.C. hear Walls
-
Critical analysis of the empirical relations for the evaluation of the ultimate plastic rotation of R.C. columns under cyclic loadings
-
Boundary elements of thin reinforced concrete wall vulnerable to out-of-plane instability: experimental results and numerical modelling
-
Dual-phase steel reinforcing bars for RC buildings in seismic prone areas : selection and production
-
Reinforced Concrete structures with Dual-Phase steel reinforcing bars
-
Buckling implementation in PARC_CL2.1 for the response prediction of steel bars subjected to cyclic loading
-
Analytical and Numerical Methods for the Evaluation of Critical Conditions in Longitudinal Bars of RC Columns
-
Cyclic bar model with bond-slip for non linear analysis of existing RC structure
-
Pitting corrosion effects on the seismic behaviour of existing R.C. buildings
-
Design and realization of a reinforced concrete building at Accra (Ghana), called One Airport Square, with complex geometric façades and spatial truss system, placed on seismic isolator devices
-
Influence of normal stress on the seismic response of masonry structures
-
Fiber-based modeling of masonry cross sections subjected to axial loading and biaxial bending
-
Implementing and Applying a Continuum Bed Joint Shearing Model for Masonry Structures
-
Reliability of Equivalent-Frame Models for Masonry Walls with Irregular Openings
-
The effectiveness of strut model of the spandrel panels in masonry buildings under seismic forces
-
Modelling of masonry walls with geometric irregularities: open problems
-
Model uncertainties in seismic analysis of existing masonry buildings : the Equivalent-Frame Model within the Structural Element Models approach
-
Rocking response of masonry columns : experimental study and numerical simulation
-
Dynamic collapse testing of a full-scale URM cavity-wall structure
-
Shaking table tests of URM walls subjected to two-way bending out-of-plane seismic excitation
-
Material characterization for the shaking-table test of the scaled prototype of a stone masonry building aggregate
-
Shaking-table test of a half-scaled natural stone masonry building aggregate with flexible diaphragms
-
A Cyclic Macroelement for Dynamic Analysis of Unreinforced Masonry Structures
-
Seismic performance of structural systems equipped with buckling-restrained braces
-
Nonlinear dynamic analysis of Italian code-conforming one-storey steel buildings for seismic risk assessment
-
Cyclic inelastic tests on built-up steel columns including base-plate connections
-
Numerical modelling of the monotonic behaviour of hybrid steel-concrete shear walls
-
Precast slab and double-slab R.C. wall in steel structures
-
A semi-analytical model for the cyclic behavior of shear link in eccentrically braced frames structures
-
Effectiveness of the capacity design regulations for eccentrically braced frames structures
-
Seismic Design of Automated Rack Supported Warehouses
-
Down-Aisle Seismic Behavior of Pallet-Rack Systems : Experimental Tests and Numerical Analyses
-
Effects of pinching in the hysteresis loop of rack connections
-
Performance based assessment of an industrial steel structure with scaled and unscaled ground motions
-
The New Guidelines of Italian High Council of Public Works for industrial steel racks in seismic areas : the state of work
-
High bay warehouses in seismic areas : general design problems and applications
-
Mechanical behaviour of inclined screws in timber-concrete composite system
-
Numerical analysis of timber log-haus walls with steel dovetail reinforcements under in-plane seismic loads
-
Assessment of the seismic safety of post-and-beam timber buildings braced with nailed shear walls: pushover anaysis based on equivalent diagonal springs
-
The role of the diaphragm stiffness on the distribution of the seismic action among the shear walls in crosslam massive wooden buildings
-
On seismic design of structures with CLT walls
-
Design of a mass-timber building with different seismic bracing technologies
-
TRE3 project : a hybrid timber-frame wall system for emergency housing facilities
-
Estimation of seismic fragility curves for precast RC industrial buildings from damage observational data from the 2012 Emilia earthquake
-
Design and experimental verification of wet-joints between precast beams and columns for the construction of seismically resistant pipe rack structures
-
Seismic retrofit strategies for friction beam-to-column connections of industrial RC precast structures
-
Analysis of a tile-beam connection for precasted industrial buildings and its influence on the global seismic response of the structure
-
Development of equivalent structural models for the coupled analysis of the dynamic soil-structure interaction
-
Nonlinear Response of Bridge Piers Founded on Inclined Pile Groups
-
Simplified polynomial formulation for the calculation of the Moment-Curvature diagram of RC rectangular sections
-
Effects of spread and local geometrical irregularities on the horizontal carrying capacity of masonry arches
-
Influence of soil thrust on seismic capacity of masonry arch bridges
-
Seismic behaviour of stone arch bridges in Sicily
-
Influence of the arch thickness discontinuities on the seismic capacity of masonry bridges
-
Protection of Critical Infrastructure in the event of Earthquakes : CIPCast-ES
-
Response prediction of multistory RC walls using static and dynamic nonlinear analysis and PARC_CL2.0 crack model
-
PRIAMUS : A new tool for the probabilistic risk assessment with Monte Carlo simulations of Process Plants under Seismic Loading
-
Assessment and retrofitting of a metal silo for granular solids to be installed in seismic zone
-
Static and dynamic studies of a three span arch ancient masonry bridge of railway line Canicattì-Gela-Comiso
-
A Profitability analysis for assessing the optimal seismic retrofit strategy for production processes susceptible to business interruption
-
Model identification of damping in railway beam bridges
-
Ambient vibration testing of an historic masonry structure
-
Equivalent modal parameters in monitored buildings during the recent Italian seismic events
-
Experimental setup for the execution of quasi-static cyclic tests on ceilings
-
Study of the Dynamic Behavior of Isolated Seismic Mass for the Creation of a 6 Degree of Freestanding Table
-
Identification of Infill Panels' stiffness in Frame Structures through Inverse Analysis
-
Experimental comparison of in-plane mechanical response of glazed curtain walls
-
Assessment of concrete strength in existing structures according to the EC8-3 procedure
-
Abacus of the masonry types of the Toscana Region
-
Critical Analysis About National And International Experimental Campaigns On Spandrels Executed During Last Years
-
Laboratory Calibration and In Situ Application of Test Methods to Assess Masonry Shear Characteristics thought Flat Jack (FJ-SCT Method)
-
Experimental assessment of the seismic performance of full-scale curtain wall systems
-
Numerical Interpretation of Experimental Tests on Masonry Spandrels
-
Smart technologies for integrated seismic risk management in industrial plants
-
The role of dynamic monitoring for seismic assessment of monumental heritage buildings : an application to Palazzo dei Consoli in Gubbio
-
The role of environmental effects in the structural health monitoring : the case study of the Ficarolo Tower in Rovigo, Italy
-
Traffic effects on historical artefacts
-
Far-field earthquake-induced damage detection in a monumental bell-tower after Central Italy seismic sequence (2016) through vibration-based SHM.
-
Numerical and experimental analyses to evaluate the effect of soil and nonstructural elements on the modal parameters of reinforced concrete structures
-
Seismic Improvement Of Monumental Historic Buildings Using Horizontal Steel Bracing Systems : Case Studies, Comparative Evaluations With Alternative Systems
-
Forming New Steel-Framed Openings in Load-Bearing Masonry Walls : Design Methods and Nonlinear Finite Element Simulations
-
Cyclic response in shear and design criterion of brick-cement mortar masonry shear-walls retrofitted with steel grids
-
Working on existing buildings : seismic retrofit with application of CAM® System
-
Influence of beam-column joints behaviour on seismic response of R.C. existing buildings
-
Experimental behavior of damaged RC beam-column joints retrofitted with FRP composites
-
Cyclic Response of R/C Beam-Column Joints Strengthened with Steel FRP/FRCM Composite Materials
-
Axial compressive behavior of FRP/Steel-confined concrete with preload
-
Evaluation of the mechanical properties of the concrete columns confined with FRP and FRCM systems in compression
-
Shear strength model with variable inclination of concrete stress field for r.c. beams strengthened by composite textile
-
Bond behaviour of steel FRP/FRCM systems on concrete substrates : an experimental investigation
-
Experimental Characterization of FRCM Systems for Conservative and Strengthening Intervention on Monumental Real Estate Heritage
-
Experimental and numerical study on the behaviour of masonry vaults subjected to horizontal loads : evaluation of the effectiveness of fiber reinforced mortar
-
Full Scale Tests on Hollow Brick Masonry Walls Repaired with Steel Fiber Reinforced Mortar Coating
-
Numerical Study of a Full Scale Hollow Brick Masonry Building Strengthened with Steel Fiber Reinforced Mortar Coating
-
Seismic Strengthening with Damping Devices and Performance Evaluation
-
Non-linear time history analyses of unreinforced masonry building with in-plane stiffened timber floors
-
Strategies and modeling methods for the reduction of the seismic vulnerability of historical industrial buildings with wide timber roofs
-
In-plane strengthening of traditional timber floors by means of CLT panels : experimental tests and numerical analysis
-
Seismic protection of existing r.c. buildings with post-tensioned timber walls
-
CLT used as seismic strengthener for existing masonry walls
-
Interventions aimed at reducing the excessive deformability of timber floors : strengthening and stiffening techniques according to the new Italian code (NTC)
-
Restoration and seismic improvement of some construction aggregates in the historic center of L'Aquila
-
Restoration, strengthening and seismic improvement design of the Duomo of Pienza
-
Effectiveness of the techniques used to strengthen the masonry buildings in the historic centre of Norcia (Italy)
-
Status of the ongoing reconstruction process in L'Aquila eight years after the quake : a general overview
-
Historical artistic renovation and seismic improvement : securing and implementation of a new system supporting the pulpit of Donatello's bronze Passion of the Basilica of San Lorenzo in Florence
-
Seismic and vibration protection of the statue Pietà Rondanini by Michelangelo
-
Seismic Performance of Structures Isolated with FPS for Different Soil Conditions considering Intermediate Isolation Degrees
-
Seismic Reliability of Yielding Base-Isolated Structures
-
Assessment of the seismic response of Multi-Stage Concave Surface Slider devices
-
The local ground-motion amplification and the behaviour of the seismic isolated buildings at L'Aquila downtown
-
Improved response-spectrum analysis of base isolated buildings : Elastic versus inelastic response spectra
-
Anti-Seismic Devices : Dynamic Testing Protocols and Testing Facilities Development
-
A simplified method to predict torsional effects on seismic isolated buildings
-
Experimental and Numerical Study of Two-Story Post-Tensioned Seismic Resisting CLT Wall with External Hysteretic Energy Dissipaters
-
Metallic yielding devices for seismic vibration control : the role of the analytical models